Heavy Duty Professional Hand Saws
Silky saws cut as you pull the blade toward you. They do not cut on the forward or push stroke and need little pressure to cut efficiently. The kerth of the blade is such that it bites into the wood as it is pulled across without extra pressure from the operator.
Every part of these range of Silky saws are replacable including sheath, clips, bolts, blades etc.
No setting of the teeth is required.
Silky saws are quality assured.
IBUKI SAW
The Ibuki saw, a large professional curved saw has a substantial 390mm blade and comfortable rubber handle reduces vibration. Also the handle offers superior grip when hands are wet or cold or when wearing gloves.
The Ibuki saw comes with a sheath. The blade is able to be sharpened and are made from SK-4 high carbon steel and taper ground i.e. thicker at the tooth edge, thinner at the back of the blade. This taper reduces resistance giving smoother, easier, faster cutting performance. This saw has a 4 teeth configuration for very quick cutting. The teeth of the blades are heated and hardened by a special high frequency heating technique, whilst the unheated remainder of the blade still retains its normal flexibility, yet stay sharp about three times longer than non-hardened teeth.
NATANOKO SAW
A mono-constructed saw with a rubber grip. A well balanced and durable saw. A very clean cut is achieved with Mirai-me technology and available with a 300 and 330 mm blade. Mono-construction gives strength and flexibility to the full length of the saw and the rubber hand grip encases the blade which absorbs vibration while cutting. The saw gives a smooth finished surface which minimises risk of infection and disease as the wound should heal very quickly. Used as a general use pruning tool.
ZUBAT
The Zubat us a curved saw with Mirai-Me Technology. The teeth setting are bent inwards usually teeth setting are outwards, this can damage the cutting surface of the tree branches. To avoid this, the saw has been designed with teeth bent inwards. The Zubat is mono-constructed with a rubber overlayed handle. The saws have 7.5 teeth per 30mm. The blade lengths available are 180mm, 240mm, 270mm, 300mm and 330mm.
Blades from the Zubat can also be fitted to an extention pole which can give extra reach of up to 1.8m.
POCKET BOY
A superior light-weight, durable and compact folding saw. It has a tremendous cutting capacity. The blade has two adjustment angle adjustment for the blade which allows easier manouverability when pruning the more dense areas of the tree.
There is no need to set the teeth as they are Hard Chrome Plated. The Pocket Boy is an excellent general use pruning saw.
ROOT AND SUCKER PRUNING SAW
Root and sucker cutting can be easily done with this specialised pruning saw. The blade is hard chrome plated on the whole blade including the teeth. Chrome plating makes the teeth harder and helps the blade to last longer. This saw can withstand cutting at ground level even with sand and soil etc about the blade but has less cutting capacity than the other saws.
BIGBOY REACH SAW (360mm)
The Bigboy saw is designed for extra reach. With a thicker aluminium handle and longer blade, this is a very large folding pruning saw. It has a rubber handle for better grip.
Other specialty saws are available. Please contact us with your requirement.
